1x16 1x32 Blockless Fiber Optic Splitter ABS Cassette Modular With
Connector
High quality Fiber PLC Splitter 1x2 1x4 1x8 1x16 1x32 1x64 1x128
Blockless type , ABS cassette modular with SC/LC/FC connector
High quality Fiber PLC Splitter 2x2 2x4 2x8 2x16 2x32 2x64 2x128
Blockless type , ABS cassette modular with SC/LC/FC connector
Planar lightwave circuit (PLC) splitter is an optical power
distribution device based on the integrated waveguide of quartz
plate. With the features of small size, wide range of operating
wavelength, stable reliability and good uniformity, It’s widely
used in PON,ODN,FTTX point to connect between termination device
and central office to achieve the signal splitter.
OMC ‘s fiber PLC Splitter family has 1x2, 1x4, 1x8, 1x16, 1x32, 1x64, 2x2, 2x4, 2x8, 2x16,
2x32,2 x 64 PLC splitter, with specifications that are tailored for
different applications and markets. Wide bandwidth, compact size.
All products meets, ROHS, GR-1209-CORE-2001 and GR-1221-CORE-1999.
Specification
| 1xN PLC Optical Splitter |
| Channel Number | 1x2 | 1x3 | 1x4 | 1x6 | 1x8 | 1x12 | 1x16 | 1x24 | 1x32 | 1x48 | 1x64 | 1x128 |
| Operation Wavelength(nm) | 1260-1650 |
| Fiber Type | G657A Or Customer Specified |
| Insertion Loss(dB)(P/) | Max | 3.8 | 6.1 | 7.1 | 9.0 | 10.2 | 12.5 | 13.5 | 15.5 | 16.5 | 18.4 | 20.2 | 23.8 |
| Uniformity(dB) | Max | 0.4 | 0.4 | 0.6 | 1.6 | 0.8 | 1.2 | 1.2 | 1.5 | 1.5 | 2.0 | 2.0 | 2.5 |
| Polarization Dependent Loss(dB) | Max | 0.2 | 0.2 | 0.2 | 1.2 | 0.2 | 0.25 | 0.25 | 0.3 | 0.3 | 0.4 | 0.4 | 0.4 |
| Returen Loss(dB) | Min | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 |
| Directivity(dB) | Min | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 |
| Wavelength Dependent Loss(dB) | Max | 0.5 | 0.5 | 0.5 | 1.5 | 0.5 | 0.8 | 0.8 | 0.8 | 0.8 | 1.0 | 1.0 | 1.2 |
| Temperature Stability(-40~85℃)(dB) | Max | 0.5 | 0.5 | 0.5 | 1.5 | 0.5 | 0.5 | 0.5 | 0..5 | 0.5 | 0. | 0.5 | 0.5 |
| Operating Temperature(℃) | -40~85 |
| Storage Temperature(℃) | -40~85 |
Bare Device Size(mm)(LxWxH) | 40x4x4 | 40x4x4 | 40x4x4 | 40x4x4 | 40x4x4 | 60x7x4 | 60x7x4 | 60x7x4 | 60x7x4 | 60x12x6 | 60x12x6 | N/A |
Mini Module Size(mm)(LxWxH) | 60x7x4 | 60x7x4 | 60x7x4 | 60x7x4 | 60x7x4 | 60x7x4 | 60x12x4 | 80x20x6 | 80x20x6 | 100x40x60 | 100x40x60 | N/A |
Box Module Size(mm)(LxWxH) | 100x 80x10 | 100x 80x10 | 100x 80x10 | 100x 80x10 | 100x 80x10 | 120x 80x18 | 120x 80x18 | 120x 80x18 | 120x 80x18 | 140x 115x18 | 140x 115x18 | 140x 115x18 |
| 2xN PLC Optical Splitter |
| Channel Number | 2x2 | 2x4 | 2x8 | 2x16 | 2x32 | 2x64 | 2x128 |
| Operation Wavelength(nm) | 1260-1650 |
| Fiber Type | G657A Or Customer Specified |
| Insertion Loss(dB)(P/) | Max | 4.2 | 7.6 | 10.5 | 13.8 | 17.0 | 20.8 | 24.5 |
| Uniformity(dB) | Max | 0.9 | 1.1 | 1.2 | 1.5 | 1.8 | 2.2 | 2.5 |
| Polarization Dependent Loss(dB) | Max | 0.2 | 0.2 | 0.3 | 0.3 | 0.4 | 0.4 | 0.4 |
| Returen Loss(dB) | Min | 55 | 55 | 55 | 55 | 55 | 55 | 55 |
| Directivity(dB) | Min | 55 | 55 | 55 | 55 | 55 | 55 | 55 |
| Wavelength Dependent Loss(dB) | Max | 0.5 | 0.5 | 0.5 | 0.8 | 0.8 | 1.0 | 1.2 |
| Temperature Stability(-40~85℃)(dB) | Max | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| Operating Temperature(℃) | -40~85 |
| Storage Temperature(℃) | -40~85 |
Bare Device Size(mm)(LxWxH) | 50x4x4 | 50x4x4 | 50x4x4 | 60x7x4 | 60x7x4 | N/A | N/A |
Mini Module Size(mm)(LxWxH) | 60x7x4 | 60x7x4 | 60x7x4 | 80x12x4 | 80x20x6 | N/A | N/A |
Box Module Size(mm)(LxWxH) | 100x80x10 | 100x80x10 | 100x80x10 | 120x80x18 | 120x80x18 | 140x115x18 | 140x115x18 |
Cable Infor
| Fiber type | G657A1 |
| Pigtail cable | Bare fiber only/900um /1.6mm/1.8mm/2.0mm |
| Connector | SC, LC,FC,ST,……. |
| 2xN Splitter | Only Single Chip |
Environmental Conditions:
| Operating Temperature | ℃ | -40～+85 |
| Storage Temperature | ℃ | -40～+85 |
| Operating Humidity | %RH | ≤93 |
| Storage Humidity | %RH | ≤93 |
Application
The bare PLC splitter can allow a single GPON network interface to
be shared among many subscrib- ers and allow service providers to
enable bandwidth-intensive appli- cations. The following figure
shows 1X8 bare PLC fiber splitter inter- connected with GPON OLT
and ONT through fiber optic splice closure.
Being installed in an outside plant enclosure, PON splitter is used
to distribute or combine optical sig- nals, which gives carriers
the ability to split optical signals to multiple homes or
businesses.
Best Alternative for FTTx Solution
Being installed in an outside plant enclosure, PON splitter is used
to distribute or combine optical signals, which gives carriers the
ability to split optical signals to multiple homes or businesses.
Packaging
FAQ:
1. Are you the real factory?
Yes,we are the real factory more than 10 years
2. What is your main products?
Outdoor fiber optic cables; indoor fiber optic cables;FTTH Drop
cables;
Indoor armored patch cords fiber cable; Optical patch cords
SC/LC/FC/ST; MTP/MPO optical patch cord.
3. Do you have certificate for raw material?
We build long-term relationship cooperation with qualified ISO9001,
ROHS raw material suppliers.
4. What is your delivery time?
Within 24 hours for normal kinds of fiber optic cable;
3~5 days for fiber optic patch cords with 10000 connectors.
5. MOQ: what is your minimum quantity?
MOQ for fiber optic cables: 1KM
There is no MOQ required for fiber optic patch cords,as there’s
stock for normal kinds.
6. Do you have distributor in other country or domestic?
Until now, we sell our products to customers directly. And factory
price could be offered.
7. Payment
For large orders: T/T, L/C
For small orders: T/T,Western Union and Paypal are acceptable
