Fiber optic Patch Cable SC APC - E2000 APC OS2 9 / 125 Duplex 2.0mm
3m LSZH IEC Grade B 2.0mm
Patch Cords are used to provide optical connection for fiber optic
electronics. The use of the patch cord provides a quick and easy
method for routing fiber patches in data centers, head-ends,
cellular hubs and central offices.
The 9/125μm OS2 single mode bend insensitive fiber optic cable is
less attenuation when bent or twisted compared with traditional
optical fiber cables and this will make the installation and
maintenance of the fiber optic cables more efficient. It can also
save more space for your high density cabling in data centers,
enterprise networks, telecom room, server farms, cloud storage
networks, and any places fiber patch cables are needed.
This 9/125 OS2 single mode fiber optic cable is ideal for
connecting 1G/10G/40G/100G/400G Ethernet connections. It can
transport data for up to 10km at 1310nm, or up to 40km at 1550nm.
The patch cord can be used in interconnect or cross-connect path
connecting the incoming fibers to the electronic equipment and
providing patching within the fiber paths.
Products info
Connector | E2000 to SC | Jacket OD | 2.0mm |
Fiber Mode | 9/125μm | Jacket Color | Yellow |
Polish | APC to APC | Wavelength | 1310/1550nm |
Fiber Type | Duplex | Jacket Material | PVC/LSZH |
Insertion loss | ≤0.12dB | Interchangeability | ≤0.2dB |
Return loss | ≥60dB | Vibration | ≤0.2dB |
Operating temperature | -40~75°C | Storage temperature | -45~85°C |
Polarity | A(Tx) to B(Rx) | Fiber Grade | SM |
End-face Quality (SM)
| Zone | Range (μm) | Scratches | Defects | Reference |
| A: Core | 0 to 25 | None | None | IEC 61300-3-35:2015 |
| B: Cladding | 25 to 115 | None | None |
| C: Adhesive | 115 to 135 | None | None |
| D: Contact | 135 to 250 | None | None |
| E: Rest of ferrule | None | None |
CUSTOM option
OMC provides a full set of OEM services, such as fiber connector,
length, color, fiber grade, specification, material, package etc.
Length Tolerance
| Overall Length(L)(m) | length of tolerance(cm) |
| 0<L<1 | +5/-0 |
| 1<L<10 | +10/-0 |
| 10<L<40 | +15/-0 |
| 40<L | +0.5% x L/-0 |
Features:
●Meets Telcordia GR-326 Core and ROHS requirements.
●Clean and Scratch-Free End Face
●Proportional geometric test is applied to the normal production.
●100% interferometer check is available under special requirement.
●The connector could be SC,FC,LC,ST,MU,E2000 etc.
●The cable could be G652D,G655,G657,OM1,OM2,OM3 etc.
●The cable size could be 0.9mm,1.6mm, 2.0mm,2.8mm
Application:
Fiber CATV, Fiber Cabling system, LAN,FTTH
Packaging
This easily taken and well-protected fiber patch cable package has
been labelled and marked by OMC as de
fault .Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34
cm . Which carton to be used depends on goods
Qty . Packing can be customized.
How to Choose The Right Fiber Optic Cable Type?
PS:The difference of OM4 and OM3 fiber mode as the following
1. OM4 was developed specifically for VSCEL laser transmission and
allows 10 Gig / second link distances of up to 550 Meters (compared
to 300M with OM3).
2. The effective modal bandwidth for OM4 is more than double that
of OM3.
3. For OM4 patch cable it is 4700 MHz.km while for OM3 it is 2000
MHz.km.
| Designation | Fiber Dia.(μm) | Type | Fast Ethernet 100BASE-FX | 1 Gigabit Ethernet 1000BASE-SX | 1 Gigabit Ethernet 1000BASE-LX | 10Gbps Ethernet 10GBASE | 40Gbps Ethernet 40GBASE SR4 | 100Gbps Ethernet 100GBASE SR4 |
| OM1 | 62.5/125 | Multimode | 2000 Meters | 275 Meters | 550 Meters | 33 Meters | Not supported | Not supported |
| OM2 | 50/125 | Multimode | 2000 Meters | 550 Meters | 550 Meters | 82 Meters | Not supported | Not supported |
| OM3(Laser Optimized) | 50/125 | Multimode | 2000 Meters | 550 Meters | 550 Meters | 300 Meters | 100 Meters(SR4) | 100 Meters(SR4) |
| OM4(Laser Optimized) | 50/125 | Multimode | 2000 Meters | 550 Meters | 550 Meters | 400 Meters | 150 Meters(SR4) | 150 Meters(SR4) |
| Singlemode | 9/125 | Singlemode | 2000 Meters | 5km at 1310nm | 5km at 1310nm | 10km at 1310nm | N/A | N/A |
How to correctly choose between PVC, LSZH and OFNP?
Fiber patch cables are widely used for indoor applications like
buildings, factories, office parks, campuses and so on. Whether you
choose PVC, LSZH or OFNP jacket depends on where you're going to
run cable.
Company Information:
OMC industry co., limited, which was founded by an expert team, has
been exporting FTTX passive products since 2007. We focus on
providing innovative and integrated FTTX solutions for a variety of
applications/Networks. Our capabilities include product/solution
design, development, enhancement and integration. Our products are
among the highest performing in the industry and truly represent
the best values in the industry. We also offer training, pre and
post-sales support. We help you select the right products for your
Optical network's needs.
FAQ:
1. Are you the real factory?
Yes,we are the real factory more than 10 years
2. What is your main products?
Outdoor fiber optic cables; indoor fiber optic cables;FTTH Drop
cables;
Indoor armored patch cords fiber cable; Optical patch cords
SC/LC/FC/ST; MTP/MPO optical patch cord.
3. Do you have certificate for raw material?
We build long-term relationship cooperation with qualified ISO9001,
ROHS raw material suppliers.
4. What is your delivery time?
Within 24 hours for normal kinds of fiber optic cable;
3~5 days for fiber optic patch cords with 10000 connectors.
5. MOQ: what is your minimum quantity?
MOQ for fiber optic cables: 1KM
There is no MOQ required for fiber optic patch cords,as there’s
stock for normal kinds.
6. Do you have distributor in other country or domestic?
Until now, we sell our products to customers directly. And factory
price could be offered.
7. Payment
For large orders: T/T, L/C
For small orders: T/T,Western Union and Paypal are acceptable
