2.0mm 3.0mm Fast Connector FTTH Products SC APC 55mm Singlemode
FTTH Fast Connector SC APC 55mm Singlemode For 2x3mm 3.0mm FTTH
Drop Cable
Product introduction
Field Fast installation connector also be called Field fast installation connector or FIC. It is a
new kind of connector that could be used in FTTH project scene.
Our FIC products have been factory-polished, eliminating the need
for any polishing materials, thereby enabling the preparation and
termination of optical fibers in a fraction of the time of other
conventional methods. The connector also uses V-groove mechanical
splice principals and therefore the use of an epoxy is not required
for the termination of the connector.
This Fast Connector offers convenience in assembling and strong
stability. It allows simple optical core connection without any
additional practices, or adhesives. It does not require a working
space by connecting itself in the challeng- ing environments such
as a telephone pole and a manhole. It reconnects the cables and
reduces the connection de- fect rate by an installer error in the
field.
The Fast Connector series are already a popular solution for
optical wiring inside buildings and floors for LAN & CCTV
applications and with the expansion of FTTH, is already proving
itself to be the connector of choice by incumbents, municipalities,
utilities & alternative carriers.
Our FIC series are now available in SC, LC, or FC variants,
catering for 250um to 900um, and 2.0mm, 3.0mm diameter single mode
and multimode fiber types, including Multi-mode 62.5/125um and
Multi-mode 50/125um. The single- mode versions are available with
UPC or APC ferrules.
Working principle:
Installation introduction
Assembly of the connector requires only normal fiber preparation
tools: a fiber stripping tool, wipes and a fiber cleav- er. They
don’t need to polishing, no epoxy, No electrical power supply, no
fused the fiber. Just Strip the buffer, cleave and clean the fiber
and then insert the fiber into the Fast Connector. Installation
takes just minutes and couldn't be easier.
Related Tools:
1, FTTH Drop cable stripper, To strip the Bow type 2x3mm Drop cable
2, 0.9mm/2.0mm/3.0mm Fiber Cable Stripper. To Strip those round
cable and bare fiber of 2x3mm Drop cable
3, Fiber cleaver to cut the fiber of Cable&Fiber
4, Use the Length guard board cut the fiber in requested length,.
5, Alcohol, For Fiber Clean after cut
6, Cleanroom Wipes, for Fiber Clean after Alcohol Cleaned
Specifications:
Connector Type | SC |
Polishing | UPC and APC |
Ferrule | Ceramic |
V-Groove | Plastic Material |
Cable Diameters | 2x3mm FTTH Drop Cable 3.0mm FTTH Drop Cable |
Length |
55mm |
Insertion Loss | ≤0.3dB(typical);≤0.5dB(Max) |
Return Loss | UPC≥40dB;APC≥50dB |
Tension Strength | ≥30N |
Operating Temp | -40°C~+75°C |
3D Interferometer (Only available if customer requested)
| Type | Radius(mm) | Apex offset(μm) | Fiber (nm) |
| PC(Ф2.5 ㎜) | 10～25 | ≤70 | -100~+100 |
| APC(Ф2.5 ㎜) | 5～15 | ≤70 | -100~+100 |
Feature:
• No epoxy and polishing required
• Quick and easy fiber termination
• Precision mechanical alignment insures low insertion loss
• Superior optical performance
• Streamlined component design, convenient operation
• Pre-installed, on-site assembly without end face grinding and
consideration
• Uses proven, molded v-groove technologies
Application in FTTX:
• Fiber optic communication system and telecommunication networks
• Fiber optic data transmission
• CATV
• Optical access network
• Fiber to the Subscriber (FTTX) applications
• Optical cable interconnection
• Maintenance or emergency restoration of fiber networks
• Repair and replacement requirements
• Fiber optic equipment
