Elite MTP Trunk Cable 12F OM2 MTP Female - MTP Female OM2 50 /
125μm 3.0mm OD cable Type B Orange LSZH
12F MTP(Female)- MTP(Female) 3.0mm LSZH Trunk Cable. MTP Fiber Trunk cable is terminated with MTP connector on both
ends. MTP Trunk cables connect MTP modules together as a permanent
link. The Patch cable/trunk cables are available with 12, 24,
48,60,72 ,96,144fibers. Support speeds up to 10/40/100Gbps data
center solutions. They are typically adopted to interconnect
cassettes, panels or ruggedized MTP fan-outs, and to facilitate
rapid deployment of high-density backbone cabling in data centers
and other high fiber environments. Besides, MTP also provides much
flexibility and convenience once you have to change the connector
style in the patch panels. Instead of changing the connector on the
cable trunk, just installing a new cassette with the new connector
style on the cross-connect side of the patch panel.
The merits of MTP/MPO Trunk cable generally include:
High quality—MTP/MTP Trunk cables are factory pre-terminated,
tested and packaged along with the test reports. These reports
serve as long-term documentation and quality control.
Decreasing cable volume—MTP/MPO Trunk cables have very small
diameters, which decrease the cable volume and improve the
air-conditioning conditions in data centers.
Time saving—With the special plug and play design, MTP/MPO Patch
cable/trunk cables can be incorporated and immediately plugged in.
It greatly helps reduce the installation time.
All of OMC’s MTP Connectors are from USconec. MTP Trunk cable is a
kind of high-density cable assemblies which is generally use in
three areas.
1, The Data Center application with high dense degree environment
2, The optical fiber to the building
3, The internal connector application in fiber equipment.
MTP products’ Standard:
- Meets IEC Standard IEC-61754-7; JIS C5982; TIA-604-5(FOCIS5);
Telcordia GR-1435-CORE compliant
- Structured cabling per TIA-568-C
Product Specifications
| Connector A | MTP female 12F | Connector B | MTP female 12F |
| Fiber Mode | OM2 5125μm MM | Wavelength | 1300/850nm |
| Polish Type | PC to PC | Minimum Bend Radius | 10mm |
| Insertion Loss | 0.35dB Max (0.15dB Typ.) | Return Loss | ≥25dB |
| Attenuation at 1310nm | ≤0.32dB/km | Attenuation at 1550nm | ≤0.18dB/km |
| Jacket OD | 3.0mm | Cable Jacket | LSZH |
| Installation Tensile Load | 100 N | Long-Term Tensile Load | 50 N |
| Operating Temperature | -10°C to +70°C | Polarity | Type B |
Features
Low insertion loss, high return loss
MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector
terminations and assemblies
Economical solution for mass-termination of fiber
Designed for low loss and standard loss SM and MM applications
Ruggedized round cable, oval cable and bare ribbon options
available
Color coded housings available to differentiate fiber type, polish
type and/or connector grade
Good in repeatability and exchangeability
MTP End-Face 3D Interference Index
| Item (IEC-61300-3-30) | Minimum | Maximum |
| Radius of curvature (mm) | ROC-X(ABS) | 2000 | |
| ROC-Y(ABS) | 50mm | |
| Angle | Angle-X | -0.2° | -0.2° |
| Angle-Y | APC | 7.85° | 8.15° |
| PC | -0.2° | -0.2° |
| Fiber height (nm) | 1000nm | 3500nm |
| Max.DH.All Fiber: | -300nm | 300nm |
| DH.Adj: | -300nm | 300nm |
| DH.Ave Fiber: | -300nm | 300nm |
| Core Dip: | SM | N/A | N/A |
| MM | -200nm | 300nm |
Length Tolerance
| Overall Length(L)(m) | length of tolerance(cm) |
| 0<L<1 | +5/-0 |
| 1<L<10 | +10/-0 |
| 10<L<40 | +15/-0 |
| 40<L | +0.5% x L/-0 |
Cable drawing&Polarity
Testing Equipment
Test Assured Program
3D interferometer provides verification of MTP/MPO polishing
process, and making all parameters of the polished MT ferrule
complies and exceeds industry standards. Clean optical connectors
are paramount in providing a reliable, high-performance fiber optic
infrastructure.
Packaging
This easily taken and well-protected fiber patch cable package has
been labelled and marked by OMC as default
.Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm .
Which carton to be used depends on goods
Qty . Packing can be customized.
Company Information:
OMC industry co., limited, which was founded by an expert team, has
been exporting FTTX passive products since 2007. We focus on
providing innovative and integrated FTTX solutions for a variety of
applications/Networks. Our capabilities include product/solution
design, development, enhancement and integration. Our products are
among the highest performing in the industry and truly represent
the best values in the industry. We also offer training, pre and
post-sales support. We help you select the right products for your
Optical network's needs.
FAQ:
1. Are you the real factory?
Yes,we are the real factory more than 10 years
2. What is your main products?
Outdoor fiber optic cables; indoor fiber optic cables;FTTH Drop
cables;
Indoor armored patch cords fiber cable; Optical patch cords
SC/LC/FC/ST; MTP/MPO optical patch cord.
3. Do you have certificate for raw material?
We build long-term relationship cooperation with qualified ISO9001,
ROHS raw material suppliers.
4. What is your delivery time?
Within 24 hours for normal kinds of fiber optic cable;
3~5 days for fiber optic patch cords with 10000 connectors.
5. MOQ: what is your minimum quantity?
MOQ for fiber optic cables: 1KM
There is no MOQ required for fiber optic patch cords,as there’s
stock for normal kinds.
6. Do you have distributor in other country or domestic?
Until now, we sell our products to customers directly. And factory
price could be offered.
7. Payment
For large orders: T/T, L/C
For small orders: T/T,Western Union and Paypal are acceptable
