Amored MTP Trunk Cable OM3 / OM4 12 / 24 Fibers 50 / 125μm MTP
Female Aqua Steel Kevlar Rugged Shell For 40G / 100G
MPO/MTP Armored Trunk Cable is specifically designed for
indoor/outdoor applications. Its rugged shell with steel and Kevlar
is 10 times stronger than regular Fiber Optic Cable and has a 40%
higher rated range of operating temperature. The apply place are in
the floor corner. Those products could protect the fiber bite by
mouse and ant. Although armored fiber optic cables are strong, they
are actually as flexible as standard fiber optic patch cords; they
can be bending randomly without being broken. The rugged armored
cables allow optical fiber to be installed in the most hazardous
areas, including environments with excessive dust, oil, gas,
moisture, or even damage-causing rodents.
The 12F MTP-MTP(MPO-MPO) Trunk cable is designed for 40G QSFP+ SR4, 40G QSFP+ CSR4 and 100G QSFP28 SR4
optics direct connections and high-density data center.
The 24F MTP-MTP(MPO-MPO) Trunk cable is designed for 100GBASE-SR10 CXP/CFP Interconnect
Solution,100GBASE-LR4 and high-density data center.
Please Note: MTP is a registered trademark of US Conec Ltd. The US Conec MTP
connectors are fully compliant with the MPO standards, achieving
higher performance levels when compared to generic MPO connectors.
MPO/MTP products’ Standard& Compliant:
Meets IEC Standard IEC-61754-7; JIS C5982; TIA-604-5(FOCIS5);
Telcordia GR-1435-CORE compliant
Structured cabling per TIA-568-C
Parallel Optics
Optical Internetworking Forum (OIF) Compliant
InfiniBand Compliant
10G Fiber Channel Compliant
40G and 100G IEEE 802.3
QSFP
Optical Prformance.
Features:
Low insertion loss, high return loss
100% 3D interferometer tested and passed.
MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector
terminations and assemblies
Economical solution for mass-termination of fiber
Designed for low loss and standard loss SM and MM applications
Ruggedized round cable, S
Color coded housings available to differentiate fiber type, polish
type and/or connector grade
Good in repeatability and exchangeability
AVAILABILITY: 8F/12F/24F…..MPO/MTP
Interference Index :
| Connector type | Testing items | Min | Max |
| MPO/MTP PC | ROC_X(abs)(mm) | 500 | |
| ROC_Y(abs)(mm) | 50 | |
| Angle_X(deg) | -0.2 | 0.2 |
| Angle_Y(deg) | -0.2 | 0.2 |
| Max.DH.All Fiber(nm) | -600 | 600 |
| Max.DH.Ave(nm) | -300 | 300 |
| Max.DH.Adj(nm) | -300 | 300 |
| Max. Core Dip(nm) | -300 | 300 |
| Fiber height(nm) | -300 | 300 |
| ROC_X(abs)(mm) | 1000 | 3000 |
| MPO/MTP APC | ROC_X(abs)(mm) | 500 | |
| ROC_Y(abs)(mm) | 50 | |
| Angle_X(deg) | -0.2 | 0.2 |
| Angle_Y(deg) | 7.8 | 8.2 |
| Max.DH.All Fiber(nm) | -600 | 600 |
| Max.DH.Ave(nm) | -300 | 300 |
| Max.DH.Adj(nm) | -300 | 300 |
| Fiber height(nm) | | |
MTP Connector Types
 |  |
| MPO Male with Pins | MPO Female without Pins |
Two other clearly visible features are the noses and guide grooves
(keys) on the top side. (Note: Female connector need to connect with male connector type.) |
Pre-terminated MTP Technology-Polarity
12F MTP:The three polarity methods Type A, Type B and Type C are used to
guarantee the right bi-directional allocation.
Please Note: When it is connected with two 40G QSFP+ transceivers,
please choose the Type B Cross as polarity; when it is connected
with other equipment such as MPO LGX Cassette, you can choose any
of the polarities as you need.
24F MTP
Benefits of Armored Fiber Patch Cable
Common fiber optic cable is fragile, which needs to be protected,
especially when in harsh applications where cables could be
compromised by rodents, constant wear and tear or weather damage.
Armored fiber patch cable retains all the features of standard
fiber cable but is much stronger due to its extra layers of armor.
With the protection of flexible and durable steel tube, armored
fiber patch cable will ensure the excellent operation of your
network.
Ideal for harsh installation conditions that require exceptional
durability. It is used as interconnection or cross connection in
data center. It is also used in ceiling, corridor and other harsh
environment.
Packaging
This easily taken and well-protected fiber patch cable package has
been labelled and marked by OMC as default
.Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm .
Which carton to be used depends on goods
Qty . Packing can be customized.
Company Information:
OMC industry co., limited, which was founded by an expert team, has
been exporting FTTX passive products since 2007. We focus on
providing innovative and integrated FTTX solutions for a variety of
applications/Networks. Our capabilities include product/solution
design, development, enhancement and integration. Our products are
among the highest performing in the industry and truly represent
the best values in the industry. We also offer training, pre and
post-sales support. We help you select the right products for your
Optical network's needs.
FAQ:
1. Are you the real factory?
Yes,we are the real factory more than 10 years
2. What is your main products?
Outdoor fiber optic cables; indoor fiber optic cables;FTTH Drop
cables;
Indoor armored patch cords fiber cable; Optical patch cords
SC/LC/FC/ST; MTP/MPO optical patch cord.
3. Do you have certificate for raw material?
We build long-term relationship cooperation with qualified ISO9001,
ROHS raw material suppliers.
4. What is your delivery time?
Within 24 hours for normal kinds of fiber optic cable;
3~5 days for fiber optic patch cords with 10000 connectors.
5. MOQ: what is your minimum quantity?
MOQ for fiber optic cables: 1KM
There is no MOQ required for fiber optic patch cords,as there’s
stock for normal kinds.
6. Do you have distributor in other country or domestic?
Until now, we sell our products to customers directly. And factory
price could be offered.
7. Payment
For large orders: T/T, L/C
For small orders: T/T,Western Union and Paypal are acceptable
