9 / 125μm 0.9mm ST UPC Simplex Optical Fiber Pigtail With OS2 G652D
LSZH Yellow Tight Buffer Low Reflection Loss
The fiber optic pigtail is normally a tight/Tight buffered fiber
cable with a connector pre terminated on one end and
exposed fiber on the other. The end is stripped and fusion spliced
to a single or multi-fiber trunk. When utilized
properly, the fiber optic pigtail allows light signal transmission
with minimal return loss and low attenuation. Make
sure your network is reinforced with OMC’s fiber pigtails, as ours
are manufactured of superior quality materials.
The Pigtail are available in both single and multimode versions
with either APC or UPC polish types. Our fiber pigtails
come with a partial outer jacket protecting the Tight/Loose buffers
from damage. If installed in a high density application,
the outer jacket can be easily removed to accommodate a tighter
bend radius for the pigtails.
We offer Individual single pigtails, Discounted 6 packs, or 12
Packs. Also 12 fiber or 6 fiber jacketed pigtails .
Products info
| Connector A | ST | Connector B | Unterminated |
| Fiber Grade | G652D | Fiber Count | Simplex |
| Polish | UPC | Cable Diameter | 0.9mm |
| Jacket Material | PVC/LSZH/OFNR/OFNP | Jacket Color | 12 different colors |
| Wavelength | 1310nm and 1550nm | Durability | >1000 Times |
| Insertion loss | ≤0.3dB | Interchangeability | ≤0.2dB |
| Return loss | ≥50dB | Vibration | ≤0.2dB |
| Operating temperature | -40~75°C | Storage temperature | -45~85°C |
Features:
- Low insertion loss, Low back reflection loss
- Flexible and easy to strip fiber buffering
- Identifiable fiber buffer colors under all lighting conditions
- Reduces installation time
- Avoids incorrect patching by possible fiber flipping
- Clean and Scratch-Free End Face
- Proportional geometric test is applied to the normal production.
- 100% interferometer check is available under special requirement.
Application
1.Optical fiber communication systems engineering.
2.Fiber optic data communication network.
3.Fiber CATV engineering.
4.Other optical technology tests.·
Geometric Specification (only for 3D interferometer tested)
| Test items | Connectors | PC End-face | APC End-face |
| Radius of Curvature | ST | 10~25 mm | 5~12 mm |
| Apex Offset | ≤50 um |
| Fiber Spherical Height | +/- 50 nm |
| Angular Offset | ------ | 8°± 0.2° |
Length tolerance
| Overall Length(L)(m) | length of tolerance(cm) |
| 0<L<1 | +5/-0 |
| 1<L<10 | +10/-0 |
| 10<L<40 | +15/-0 |
| 40<L | +0.5% x L/-0 |
Two Important Methods for Fiber Optic Pigtail Splicing
Fiber optic pigtail assemblies are utilized in terminating fiber
optic cables via fusion or mechanical splicing.
Packaging
This easily taken and well-protected fiber optical cable package
has been labelled and marked by OMC as default
.Standard carton size : 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm .
Which carton to be used depends on
goods Qty . Packing can be customized.
How to Choose The Right Fiber Optic Cable Type?
PS:The difference of OM4 and OM3 fiber mode as the following
1. OM4 was developed specifically for VSCEL laser transmission and
allows 10 Gig / second link distances of up to 550 Meters (compared
to 300M with OM3).
2. The effective modal bandwidth for OM4 is more than double that
of OM3.
3. For OM4 patch cable it is 4700 MHz.km while for OM3 it is 2000
MHz.km.
| Designation | Fiber Dia.(μm) | Type | Fast Ethernet 100BASE-FX | 1 Gigabit Ethernet 1000BASE-SX | 1 Gigabit Ethernet 1000BASE-LX | 10Gbps Ethernet 10GBASE | 40Gbps Ethernet 40GBASE SR4 | 100Gbps Ethernet 100GBASE SR4 |
| OM1 | 62.5/125 | Multimode | 2000 Meters | 275 Meters | 550 Meters | 33 Meters | Not supported | Not supported |
| OM2 | 50/125 | Multimode | 2000 Meters | 550 Meters | 550 Meters | 82 Meters | Not supported | Not supported |
| OM3(Laser Optimized) | 50/125 | Multimode | 2000 Meters | 550 Meters | 550 Meters | 300 Meters | 100 Meters(SR4) | 100 Meters(SR4) |
| OM4(Laser Optimized) | 50/125 | Multimode | 2000 Meters | 550 Meters | 550 Meters | 400 Meters | 150 Meters(SR4) | 150 Meters(SR4) |
| Singlemode | 9/125 | Singlemode | 2000 Meters | 5km at 1310nm | 5km at 1310nm | 10km at 1310nm | N/A | N/A |
How to correctly choose between PVC, LSZH and OFNP?
Fiber patch cables are now widely used for indoor applications like
buildings, factories, office parks ,campuses and so on. Whether you
choose PVC, LSZH or OFNP jacket depends on where you're going to
run the cable.
Company Information:
OMC industry co., limited, which was founded by an expert team, has
been exporting FTTX passive products since 2007. We focus on
providing innovative and integrated FTTX solutions for a variety of
applications/Networks. Our capabilities include product/solution
design, development, enhancement and integration. Our products are
among the highest performing in the industry and truly represent
the best values in the industry. We also offer training, pre and
post-sales support. We help you select the right products for your
Optical network's needs.
FAQ:
1. Are you the real factory?
Yes,we are the real factory more than 10 years
2. What is your main products?
Outdoor fiber optic cables; indoor fiber optic cables;FTTH Drop
cables;
Indoor armored patch cords fiber cable; Optical patch cords
SC/LC/FC/ST; MTP/MPO optical patch cord.
3. Do you have certificate for raw material?
We build long-term relationship cooperation with qualified ISO9001,
ROHS raw material suppliers.
4. What is your delivery time?
Within 24 hours for normal kinds of fiber optic cable;
3~5 days for fiber optic patch cords with 10000 connectors.
5. MOQ: what is your minimum quantity?
MOQ for fiber optic cables: 1KM
There is no MOQ required for fiber optic patch cords,as there’s
stock for normal kinds.
6. Do you have distributor in other country or domestic?
Until now, we sell our products to customers directly. And factory
price could be offered.
7. Payment
For large orders: T/T, L/C
For small orders: T/T,Western Union and Paypal are acceptable
